EDOT™ Epoxy Anchoring Adhesive

EDOT-hero

Formulated specifically for transportation projects, EDOT™ is a two-component, high-solids epoxy system. It is designed for use as a high-strength, nonshrink anchor grouting material providing an economical and high-strength solution for transportation applications. Resin and hardener are dispensed and mixed simultaneously through the static mixing nozzle. EDOT meets the requirements of ASTM C-881 and AASHTO M235 specifications for Type I, II, IV and V, Grade 3, Class C.

USES

  • Threaded rod anchoring
  • Rebar doweling

APPLICATION

Surfaces to receive epoxy must be clean. The base material temperature must be 40ºF or above at the time of installation. For best results, material should be 70ºF–80ºF at the time of application. Cartridges should not be immersed in water to facilitate warming. To warm cold material, the cartridges should be stored in warm, uniformly heated area or storage container for a sufficient time to allow epoxy to warm completely. Mixed material in nozzle can harden in 5-7 minutes at a temperature of 40ºF or above.

About