HRS/ST/FHA/PS/LSTA/LSTI/MST/MSTA/MSTC/MSTI Strap Ties

148d-2008_xtra-lg

Straps are load rated and provide the correct thickness and number of fasteners the specifier is looking for compared with field fabricated straps.

Install Strap Ties where top or bottom plates are cut, at wall intersections, and as ridge ties. Reduce the allowable load based on the size and quantity of fasteners used.

Refer to applicable code for minimum edge and end distances.

Finish: PS – hot-dip galvanized (HDG); all others – galvanized. Some products available in stainless steel and ZMAX®.

 

  1. Use half of the fasteners in each member being connected to achieve the listed loads.
  2. Loads are based on lesser of steel capacity or fastener calculation.
  3. Not all fastener holes need to be filled as additional fastener holes are provided. Install fasteners symmetrically..
Category: . Tags: , , , , , , , , , , .

About